Installation guide

5
4. Click Browse my computer for driver
software.
5. Type D:, then click Next. (Change D: to
match your CD/DVD-ROM drive letter)
6. Click Install this driver software anyway.
7. At Windows has successfully updated
your driver software, click Close.
8. Right click PCI Device, click Update Driver
Software.
9. Repeat steps 4-7.
10. Right click CyberSerial Communication
Port, click Update Driver Software.
11. Repeat steps 4-7.
12. Right click CyberSerial Communication
Port, click Update Driver Software.
13. Repeat steps 4-7 to complete the installation.
Windows Vista (32-/64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware window,
insert the driver CD, click Locate and install
driver software (recommended), then click
Continue.