Installation guide

4
2. Unplug the power cord from the computer.
3. Remove the computer cover.
4. Remove the slot bracket from an available
PCI slot.
5. To install the card, carefully align the card's
bus connector with the selected PCI slot on
the motherboard. Push the board down
firmly, but gently, until it is well seated.
6. Replace the slot bracket holding screw to
secure the card.
7. Replace the computer cover and reconnect
the power cord.
Driver Installation
Please make sure the board is installed before
proceeding with driver installation.
Windows 7 (32-/64-bit)
1. Install the board and boot up Windows.
2. Right click Computer, click Manage, click
Device Manager.
3. Insert the driver CD. Right click PCI Serial
Port, click Update Driver Software.