Installation guide

13
2. Click Settings tab, click the down arrow
next to Port Name, select a COM address
not currently in use.
3. Click OK, then close Device Manager to
save the changes.
Changing Parallel Port Address (LPT)
Some parallel devices need a specific parallel port
in order to work. If your parallel device works
properly, do not change this setting.
Windows 7 / Vista / XP / Server 2003 &
2008 / 2000
1. From the Device Manager window double
click Ports (COM & LPT), then double click
SIIG CyberPro Parallel Port....
2. Click Port Settings tab.
3. At the LPT Port Number box, click the
down arrow and select an LPT port that is
not in use.
4. Click OK, then close Device Manager to
save the changes.