Installation guide

12
Changing COM Port Address
Some serial devices need a specific COM port in
order to work. If your serial device works properly,
do not change this setting.
Windows 7 / Vista / XP / Server 2003 &
2008 / 2000
1. From the Device Manager window double
click Ports (COM & LPT), then double click
CyberSerial... port.
2. Click Settings tab and click Advanced.
3. Click the down arrow next to the COM Port
number box, select a COM port that is not
in use. Click OK.
4. Click OK, then close Device Manager to
save the changes.
Windows ME / 98SE / 98 / 95
1. From the Device Manager window double
click Ports (COM & LPT), then double click
the CyberSerial PCI serial port you want
to change.