User Manual

5
EDID Setting
There are 8 settings.
-"1": The button on the upper position
-"0": The button on the lower position
*Auto EDID analysis learning mode will detect all the connected HDMI monitors and
analyze their EDID. The monitor with highest capabilities will be the reference EDID
for all HDMI outputs.
Switch Position
Description
Pin 1
1 Working Mode
0
Firmware Update Mode
(Note: In this setting, the unit won't work since it's for firmware updates)
Switch Position
Description
Pin 2
Pin 3 Pin 4
1 1 1
Ultra HD(4K2K@60Hz) - 8/10/12bit 3D HDR video &
7.1ch audio
0 1 1
Ultra HD(4K2K@60Hz) - 8/10/12bit 3D HDR video &
2ch audio
1 0 1
Ultra HD(4K2K@30Hz)(4K2K@60Hz 4:2:0) - 8bit 3D HDR
video & 7.1ch audio
0 0 1
Ultra HD(4K2K@30Hz)(4K2K@60Hz 4:2:0) - 8bit 3D HDR
video & 2ch audio
1 1 0 Full-HD(1080p@60Hz) - 12bit 3D video & 7.1ch audio
0 1 0 Full HD(1080p@60Hz) - 8bit 2D video & 2ch audio
1 0 0 Learning EDID from output 1
0 0 0 Auto EDID analysis learning mode*