Installation guide

6
7. Type D:, then click Next. (Change D: to
match your CD/DVD-ROM drive letter)
8. Click Install this driver software anyway.
9. At The sofware for this device has been
successfully installed, click Close.
10. Repeat steps 4-9 to complete the installation.
Windows XP (32-/64-bit) / Server 2003 (32-/
64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, insert
the driver CD.
3. Select No, not this time, click Next. (Skip
this step if not prompted)
4. Select Install the software automatically
(Recommended), then click Next.
5. Click Continue Anyway, then click Finish.
6. Repeat steps 3-5 three times to complete the
installation.
Windows Server 2008 (32-/64-bit)
1. Install the board and boot up Windows.