Installation guide

9
Changing COM Port Address
Some serial devices need a specific COM port in order to
work. If your serial device works properly, do not
change this setting.
Windows 7 / Vista / XP / Server 2003 & 2008 / 2000
1. From the Device Manager window, double click
Ports (COM & LPT), then double click the
CyberSerial serial port you want to change.
2. Click Settings tab, then click Advanced.
3. Click the down arrow that is next to the COM Port
number box and select a COM port that is not in use.
Click OK.
4. Click OK again, then close Device Manager to save
your changes.
Windows ME / 98SE / 98 / 95
1. From the Device Manager window double click
Ports (COM & LPT), then double click the
CyberSerial serial port you want to change.
2. Click Settings tab, click the down arrow that is next
to the Port Name box and select a COM port that is
not in use.
3. Click OK, then close Device Manager to save your
changes.