Installation guide

7
5. Repeat steps 1-4.
6. Restart Windows to complete the installation.
Windows 95
1. At the Update Device Driver Wizard, click Next.
2. Insert the driver CD, click Other Locations.
3. Type in D:\9x, click OK, then click Finish. (Change
D: to match your CD/DVD-ROM drive letter)
4. At the Insert Disk window, click OK. At Copying
Files dialog box, type in D:\9x, then click OK.
(Change D: to match your CD/DVD-ROM drive
letter)
5. Restart Windows to complete the installation.
To Verify Windows ME / 98SE / 98 / 95 Installation
1. Right click My Computer, click Properties, then
click Device Manager.
2. Double click Ports (COM & LPT), CyberSerial 950
16Cxxx... should be displayed two times.
3. Double click Multi-function adapters, SIIG
CyberPro 2S board and PCI Function should be
displayed.
Windows NT 4.0
1. From the desktop click Start, then Run.
2. Insert the driver CD, type in
D:\NT4\Install_serial.exe, then click OK.
(Change D: to match your CD/DVD-ROM drive
letter)
3. At Welcome window, click Next .
4. Select Install, then click Next.