Installation guide

6. Replace the slot bracket holding screw to secure the

card.

7. Replace the computer cover and reconnect the power

cord.

Software Installation

This section provides information on how to install the

SIIG 2-Port Serial 950-Value drivers.

Windows 7 (32-/64-bit)

1. Right click Computer, click Manage, click Device

Manager.

2. Insert the driver CD. Right click PCI Serial Port,

click Update Driver Software.

3. Click Browse my computer for driver software.

4. Type D:, then click Next. (Change D: to match your

CD/DVD-ROM drive letter)

5. At Windows has successfully updated your driver

software, click Close.

6 Right click Other PCI Bridge Device, click Update

Driver Software.

7. Repeat steps 3-5.

8. Right click CyberSerial Communication Port, click

Update Driver Software.

9. Click Browse my computer for driver software.

10. Type D:, click Next. (Change D: to match your CD/

DVD-ROM drive letter)

11. At Windows has successfully updated your driver

software, click Close.

12. Repeat steps 8-11 to complete the installation.