SIIG 2-Port Serial 550-Value Quick Installation Guide Introducing the SIIG 2-Port Serial 550-Value The SIIG 2-Port Serial 550-Value provides two 16550 UART serial ports which supports data transfer rates up to 115Kbps. Features and Benefits • • • • • • Conforms to PCI v2.2 Plug and Play Can be installed in 32-/64-bit, 3.
Layout Serial (S2) Jumpers* Serial (S1) Figure 1. Board Layout *Note: Do not move the jumpers from the default settings. This board is designed to work at 115K. Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system.
4. 5. 6. Carefully align the card to the selected PCI slot, push the board down firmly, but gently, until it is well seated. Replace the slot bracket screw to secure the card. Replace the computer cover and reconnect the power cord. Software Installation This section provides information on how to install the SIIG 2-Port Serial 550-Value drivers. Please make sure the board is installed before proceeding. Windows 95 1. 2. 3. 4. 5. At the Update Device Driver Wizard, click Next.
Windows ME 1. 2. 3. 4. At the Add New Hardware Wizard, check Specify the location of the driver (Advanced), then click Next. Check Specify a location, uncheck the other box, insert the driver CD, type in X:\2S\ME, then click Next. (Change X: to match your CD-ROM drive letter) Click Next, then Finish. Restart Windows to complete the installation. Windows NT 4.0 1 2. 3. 4. 5. From the desktop, insert the driver CD. Click Start, then Run. Type X:\2S\NT\Setup_Serial.exe, then click OK.
Windows XP 1. 2. 3. 4. 5. At the Found New Hardware Wizard, For XP SP2 or later: Select No, not this time, click Next. Select Install from a list or specific location (Advanced), then click Next. For XP SP1 or earlier: Select Install from a list or specific location (Advanced), then click Next. Insert the driver CD, check Include this location in the search, uncheck the other box, type in X:\2S\XP, then click Next.
Windows Server 2003 1. 2. 3. 4. 5. At the Found New Hardware Wizard, For Server 2003 SP1 or later: Select No, not this time, click Next. Select Install from a list or specific location (Advanced), then click Next. For Server 2003: Select Install from a list or specific location (Advanced), then click Next. Insert the driver CD, check Include this location in the search, uncheck the other box, type in X:\2S\2003, then click Next.
Windows Vista ™ 1. 2. 3. At the Found New Hardware window, click Locate and install driver software (recommended), click Continue. When prompted, insert the driver CD and the driver will install automatically. At The software for this device has been successfully installed window, click Close to complete the installation. Note: Driver installation may take several minutes to complete. DOS 1. 2. 3. 4. 5. Insert the driver CD. From the C:\> prompt, type copy X:\2S\dos\*.*, and press Enter.
Windows NT 4.0 1. 2. Click Start, Settings, Control Panel. Click Serial Port tab, two serial ports should be listed under Ports. Windows 2000/XP (32-bit)/Server 2003 (32-bit) 1. 2. 3. Right click My Computer, click Manage, then click Device Manger. Double click Multifunction adapters, NetMos... Controller should be listed. Double click Ports (COM & LPT), For Windows 2000: Two NetMos Serial Ports should be listed.
Blank Page 9
Blank Page 10
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a 2-year manufacturer warranty with this product. Please see our web site for more warranty details.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty.
