Installation guide

6
External Device Connection
External Serial ATA devices should come with their own
accessories. In most cases, you just need to power up the
external device and connect it to the external port. For
more information, please refer to the external device's
manual.
Hot-Plugging Hard Disk Drives
To remove a drive from a powered up system, do the
following:
1. Right click My Computer and click Manage.
2. Select Device Manager.
3. Click Disk Drives, right click the target disk and
select Disable/Enable.
4. You can now remove the target disk.
BIOS Configuration
The eSATA II-150 PCI BIOS will appear everytime your
system starts up. If the bios doesn't show, please try your
controller in another PCI slot. During this (Post) process,
the BIOS will show up and indicate the devices attached
to it.