Installation guide

Driver Installation

This section provides information on how to install the

CyberParallel ExpressCard drivers.

Windows 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), and click Next.

3. Check Specify a location, uncheck the other boxes,

then click Next.

4. Insert the driver CD, type in D:\2000, then click OK.

(Change D: to match your CD-ROM drive letter)

5. Click Next and Finish.

6. Repeat steps 1-5 one or two times.

7. Restart Windows to complete the driver installation.

32-bit Windows XP/Server 2003

1. At the Found New Hardware Wizard, insert the

driver CD.

For XP w/SP1 or earlier/ Server 2003: go to step #2.

For XP w/SP2 or later/Server 2003 wSP1 or later: select

No, not this time, click Next.

2. Select Install the software automatically

(Recommended, then click Next.

3. Click Finish.

4. Repeat steps 1-3.

5. Restart Windows to complete the driver installation.

64-bit Windows XP/Server 2003

1. At the Found New Hardware Wizard, insert the

driver CD. Select No, not this time, click Next.