Programming instructions

14
5 Terminals
DCIP 650-...
a
bc
d
e
f
g
Connections and LEDs IPVS 600-0
a No function
b Junction box to the SIVS 610-...
c RJ45 socket ETH network
connection
d Reset button to recreate the
as-delivered status (after a reset, the
Siedle modes must be reinstalled,
see page 29.)
e LED operating status lights up in
green on readiness for operation
f LED L lights up in green with an
existing network connection
g LED T flashes orange on data
transmission via the network
Terminals IPVS 600-0
h Video input 1Vss from the
SIVS 610-...
i Audio line In to the SIVS 610-...
j Terminal plug for control signals
i Audio line Out to the SIVS 610-...
Terminals
SIVS 610-...
a Video signal 1 Vss (cinch jack)
b Terminating resistor 75 Ohm ON/
OFF
c IN = video signal 1 Vss input,
D =video signal 1 Vss throughput
d Terminals for installation
e Connection to IPVS 600-...
g Not assigned
d Terminals for installation
g Grounding terminal
h BCD rotary switch for the In-Home
bus line address
h
i
j
k