Programming instructions
25
Step 3
(only with multiple line system)
Manually add SII650‑...
In the BPS650-... , select the
relevant line and add the SII650-...
The address of BVNG650-...,
SIVS610-... and SII650-... must
be set the same. An already
programmed SII650-... is
automatically detected by the
BPS650-....
Step 4
Create virtual users
In the first table DCIP-SC (virtual
users) create the users. Each
user should be given a unique
name wherever possible such as
Secretarial.
Step 5
In the tree structure of the
BPS650-... , select the relevant
door station and assign the users
to the previously created call
buttons. Subsequently transfer
the configuration to SII650-.../
SIVS610-...
Step 6
In the tree structure of the
BPS650-..., select the SII650-... .
Pressing the Configuration button
in the DCIP-SC... will open a new
window. In this window, it is possible
to select which users are read out
to the configuration being created.
In this selection process, different
configurations can be generated for
different software clients.
Step 7
The set configuration (*.dcip)
can be imported into Software
Client. A USB stick is advisable for
transmission of the files.