User`s guide

- 31 -
When the Battery pack Gets Low During Printing
When the Power LED starts blinking about once every 0.5 seconds and
the printer goes OFFLINE, connect the AC adapter.
The ONLINE LED will blink if there is data left in the memory buffer. In
order to print the remaining data, connect the AC adapter as quickly as
possible and push the ONLINE button.
 Battery pack efficiency will decrease if battery pack is recharged
more than necessary. Confirm whether Power LED is blinking and
battery charge has decreased before recharging battery pack.
 When using the rechargeable battery pack:
Turn off the Power Switch after use.
Leaving Power Switch ON will consume battery pack and
eventually run battery pack out, leading to low performance and
malfunction.
 When using the AC adapter:
If you are not using the printer, turn off Power Switch, and unplug
the AC adapter.
NOTE