User`s guide

- 29 -

2.10 Handling the Battery Pack

A fully charged battery pack can print about 3000 lines (40 columns of

the number ”8”). The battery discharges when it is not used for a long

time, therefore, immediately recharge the battery after purchase or after

long periods of storage.

 Always use an SII specified battery pack.

Inserting the Battery Pack

1. Turn the printer over and open the battery cover as shown in Figure

2. Connect the battery pack as shown in Figure 2, turn it so the label is

visible, insert it into the printer, and close the battery cover.

3. Close the battery cover.

Figure 1 Figure 2

NOTE

Battery pack cover

Battery pack

Connector

Label