User`s guide

- 20 -

 Setting Paper roll

(1) Press the paper cover open button to open the paper cover in the direction of the

arrow.

(2) Install the paper roll to the paper holder and make sure that the tip of the thermal

paper 5 cm or longer appears from the paper outlet and straighten the paper setting.

(3) Certainly press both sides of the paper cover to set the printer.

(4) If the paper roll with mark is used, press the FEED switch once for feeding to home

position.

NOTE

- DO NOT block the paper outlet or hold the thermal paper that is being

loaded. Otherwise, it may cause a paper jam.

- DO NOT touch the platen roller or the printer gear. If doing so, this may

result in poor print quality or malfunction of the printer.

HINT

 When using the printer with the label that is in the thermal head and

platen roller for a long time, it may cause paper feeding error. Open and

close the paper cover to release the thermal head and label, and then

press the FEED switch to feed the label home position before using.

Certainly press both sides of the

er cover to set the

rinter.