User Manual
EN
EN - 18
Child lock
The Child Lock function allows you to lock
the buttons so that the selected wash cycle
cannot be inadvertently changed.
To activate the child lock, press and hold
buttons 2 and 3 simultaneously for at least
3 seconds. When the child lock is activated,
seconds.
If you press any button or change the selected program using the program selector
seconds.
If the washing machine is already washing, the child lock is active and you try to
change the programme by turning the programme selector to CANCEL and then to
the desired programme, the washing machine will continue to wash unchanged.
To deactivate the child lock, press and hold buttons 2 and 3 simultaneously for at least
3 seconds until the "CL" symbol disappears from the display.
Cancellation of the programme
The selected programme can be cancelled at any time:
1. Switch the programme selector to the "STOP" position.
2. The washing machine stops the cycle and the programme is cancelled.
3. Turn the PROGRAMME selector to any other programme to drain the water from
the washing machine.
4. Your washing machine will perform the necessary drainage and cancel the
programme.
5. You can now select and run the new program.
End of programme
Your washing machine will stop itself when
•
• You can open the washing machine door
and take out the clothes.
• Leave the door open to allow the inside of
the washing machine to dry.
• Switch the programme selector to the "STOP" position.
• Disconnect the washing machine from the mains.
• Turn off the water supply.