User Manual

EN
EN - 15
Operating the
washing machine
1. Plug the washing machine into the
mains.
2. Turn on the water supply.
• Open the washing machine door.
• Spread the laundry evenly in the
washing machine.
• Push gently on the door until it clicks
shut.
Programme selection
Use the programme table to select the most suitable programme for your laundry.
Half-ll detection system
Your washing machine has a half-load detection function.
If you put less than half the maximum amount of laundry in the machine, it will auto-
matically set the half-load function, regardless of the programme selected. This means
that it takes less time to complete the selected programme and less water and energy
is used.
ADDITIONAL FUNCTIONS
Temperature selection
Use the water temperature setting button
to change the automatically programmed
water temperature.
After selecting a program, the maximum
temperature for that program is automati-
cally set. To change the temperature, press
the button to adjust the water temperature
until the digital display shows the desired temperature.
You can gradually reduce the water temperature between the maximum water tem-
perature of the selected programme and the cold wash (- - C) by simply pressing the
temperature setting button.
Speed selection for wringing
After selecting the programme, the maxi-
mum wringing speed is automatically set.
To change the wringing speed from maxi-
mum speed to no wringing (- - -), press the
Wring Speed button until the desired speed
is displayed.
If you have skipped the desired spin speed
when wringing, press the button repeatedly to adjust the wringing speed until the
desired speed is displayed again.
Delayed start timer (*)
You can use this additional function to delay the start of the wash cycle by 1 to 23
hours. Using the delayed start function:
1 2