Instruction Manual

EN - 8
1 Head with a brush for daily
cleaning
2 Built-in lighting
3 On / Off / Vibration speed
selection button
4 Battery compartment cover
5 Stand
6 Replacement head (not shown)
Input voltage 3,0 V⎓ (2x 1,5 V AA
battery)
Output 1.8 W
Default cleaning cycle
time
2 minutes
Dimensions 48.1 × 46.6 × 172.5 mm
Weight 150 g
USE
Inserting batteries
Batteries must be installed before using the appli-
ance. Batteries are included in the package.
1. Remove the battery compartment cover.
2. Insert two new AA batteries into the holder.
Make sure the polarity is correct. Always use
new batteries of the same type. Do not mix old
and new batteries or alkaline and rechargeable
batteries.
3. Replace the cover.
4. When replacing the batteries, follow the same
procedure, but remove the dead batteries rst.
3