Instruction Manual

EN - 6
EN
neck to the cheekbones.
5. Use on hands: Carefully move the roller from the wrist to the collarbone.
6. The massage roller automatically switches off when you remove it
from the skin. Wait until the roller stops rotating and clean it and
the appliance according to the instructions in the "Cleaning and
Maintenance" section.
CLEANING AND MAINTENANCE
Always switch off the appliance and wait until the roller stops turning before cleaning or carrying out any maintenance.
Warning:
Never immerse the appliance in water or any other liquid. Do not use plastic or metal scrapers, harsh cleaners, chemicals, petrol, solvents or other
similar substances to clean any parts of the appliance. The surface finish could be seriously damaged.
Wipe the outer surface of the appliance and the massage roller with asoft cloth slightly dampened with warm water. Wipe dry.
Storage
Make sure the appliance is clean before storing it. Keep it in a dry and well-ventilated place out of the reach of children or pets. Do not place any
objects on it.
If you are not going to use the appliance for a long period of time, remove the batteries to prevent electrolyte leakage and damage.
TROUBLESHOOTING
Problem Cause Solution
The appliance is not working properly. Batteries are empty. Replace the batteries.
The batteries are incorrectly inserted. Insert the batteries correctly.
You're not touching a smart sensor with
your fingers.
It is important to grip the appliance so that your
fingers are touching the smart sensor.
If the problem is not listed in the table above or if the problem persists, switch off the appliance, disconnect the plug from the electrical outlet and
contact an authorized service center.