Manualshelf

User Manual

ManualsBrandsSIGURO ManualsBathroom scaleSIGURO SGR-SC-S450W Diagnostic Bathroom Scale
12345678910
EN
EN - 8
7. Select user.
8. Enter personal data and save them.
Note:
To ensure comprehensive and methodical measurements, enter true and
real personal data.
Display reports
"oooo" Fat measurement
The fat measurement is in progress, stay still on the scales and make sure you are
standing barefoot on the platform.
"C" Calibration
An error has occurred, so repeat the measurement to obtain the correct values.
"Err" Scale overload
The scale has been overloaded. The weighed object is heavier than the maximum
weighing capacity of the scale. Get off the scale to avoid damaging it.
"Lo" Low battery
The batteries are very low and need to be replaced.
Weight unit change
You can change the weight units either directly in the application or on the scale.
However, the units in the application are not synchronized with the units on the scale.
To change the weight units on the scale, turn the scale upside down and switch to the
desired weight units.
Tips and advice
1. To ensure the measurement accuracy, we recommend taking measurements
at the same time each day. Do not use the scale near an unstable and strong
electromagnetic eld.
2. If you will be using the scale after a long time, rst step on it lightly, wait until
the display lights up and "0" is displayed. Then wait until the scale switches off
automatically. Only then can you perform the weighing.
3. Stand barefoot with your feet so that your feet are on the tread. Stand still and
straight as the measurement takes place. If you stand on the edge of the scale, you
could lose your balance and fall.
4. Do not use the scale in a humid and overly hot environment. The recommended
operating temperature is 5-35 ° C.
5. When the batteries are low, replace them. Also, remove the batteries if you will
not be using the scale for an extended period of time. There is a risk of electrolyte
leakage and damage to the scale.
6. Protect the scale from falls, shocks or jolts.
CLEANING AND MAINTENANCE
Keep the scale clean. Wipe the scale with a soft sponge slightly dampened in warm
water. Wipe dry with a clean cloth.