User Manual

EN
EN - 7
3. Insert four AAA batteries (4x 1.5 V) into the compartment. Observe the correct
polarity, which is marked on the bottom of the battery compartment.
4. Replace the cover.
When replacing the batteries, always replace both batteries at the same time. First re-
move the empty batteries and then insert new ones. Do not use alkaline and recharge-
able batteries at the same time.
Warning:
Never put batteries in re, short circuit or damage them in any way. After
the end of their lifetime, discard them in environmentally friendly man-
ner. Keep batteries out of the reach of children.
Note:
If you will not be using the scale for a long time, remove the batteries to
prevent electrolyte leakage and damage to the scale.
Weighing
Place the scale on a solid and level surface. Do not place the scale on carpets or other
soft surfaces, as the measurement result may be skewed.
Stand barefoot with your feet so that your feet are on the tread. Stand still and straight
as the measurement takes place.
Once the values on the display stabilize and ash, they are transferred to the applica-
tion on your smartphone. After a successful transfer, the scale displays the weight and
measured values and then the scale switches off automatically. The received data is
evaluated in the application and stored in the measurement history.
You can search and compare the measured values in the application. If you are con-
nected to the application, you will receive a notication asking if it is your personal
record.
Click on the request to conrm it and the screen with measured values will be dis-
played.
Click on the weight value to see more information about your body's measured values.
The detailed record includes various physical evaluations and results.
Use with application
This scale allows connection via Bluetooth and subsequent control using the universal
TUYA application. You can download the application by scanning the QR code on page
3 or by searching for the "Tuya Smart" application in the App Store or Play Store.
Once installed and running, the application will guide you through the controls and
necessary settings.
Device registration and connection
1. Open the application and create your account or log in to an already created
account. Follow the instructions on the screen of your smartphone.
2. Click "Add Device" or "+" to nd and add a new device to the app on the
application’s homepage.
3. Start an automatic search for a new device. Once a personal scale is found, rst
step on the scale to turn it on and then click on the scale icon in the application to
start the connection and pairing. The scale display must be lit during connection
and pairing.
4. If the application did not nd the personal scale, press and hold the change units
button for 3-5 seconds and check if the personal scale icon is displayed.
5. Click "Finish" after successfully adding a new device.
6. Return to the home screen and select the personal scale you want to use.