Instruction Manual

EN
EN - 9
4. Insert the cooker hood into the opening in the
cabinet.
5. Carefully push the xing washers outwards to
release them from the hood. It is important
that the hood in this case is inserted deeper in
the cabinet so that the washers can be easily
pushed out.
6. Once the washers are fully extended, carefully
place the hood down until the extended parts of
the washers rest on the cabinet inside.
7. Secure the xing washers with the screws and
make sure they are rmly tightened.
Note: Depending on the cabinet ty, it will be neces-
sary to drill a 24 × 11 mm hole to allow the washers
to t easier in the cabinet. Such openings have to
be drilled before inserting the hood into the cabi-
net.
The xing washers have an adjustable range of 6 to
28 mm, depending on the thickness of the wood
layer.
8. Attach the decorative frame to the hood body
with four screws. Make sure that they are
properly tightened.
9. Attach the front panel to the hood body and
plug the line back in.
10. First insert the back part of the panel into the
hood body and then the front part of the panel.
Secure using screws. Make sure they are well
tightened.