Instruction Manual

EN
EN - 14
Warning:
The uorescent light heats up during use and may be hot even after it is
turned off. Allow it to cool (at least 10 minutes) before replacing.
Type of uorescent light: L10
Shape: square
Rated power: 2 W
TROUBLESHOOTING
Problem Cause Solution
The lighting comes on, but
the range hood does not
start working.
The fan is blocked. Switch off the hood and
contact an authorized
service.
The motor is damaged.
Neither the lights nor the
hood turn on.
The uorescent light is
broken.
Replace the uorescent
light.
The plug is not inserted
properly in the socket.
Check the plug connec-
tion in the socket.
The range hood emits
strong vibrations.
The fan is blocked. Switch off the hood and
contact an authorized
service.
The fan motor is not prop-
erly tightened.
The range hood is not
properly installed.
Carefully remove the hood
and reinstall it.
Poor hood performance. The hood is placed too
high above the hob.
The recommended dis-
tance between the range
hood and the hob is 65 to
75 cm.
If the problem is not listed in the table above or if the problem persists, switch off the
appliance, disconnect the plug from the electrical outlet and contact an authorized
service center.
DISPOSAL OF USED BATTERIES
Batteries contain materials harmful to the environment. Do not dispose of
batteries in a regular community waste. Dispose of used batteries properly
at collection points.