User guide
• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: 1-800-899-5655 •Local Phone: 903-462-7700 •Fax: 1-800-966-6834
26: Tiling: Cont’d
The Tiling Window shows
the entire image with a
solid gray line showing
the default separation
line. This will always be
the maximum available
print area.
But it may not be the
best place to create the
tile. If it bisects a line of
text, joining the tiles on
your sign or substrate
may create a small dis-
traction where the tiles
overlap.
In that case, you can
choose to move the tile
border to a better place
in the design. In this case,
we’ve moved it to make
26.3
26.4
the first tile 11.75” wide. This puts the break between two blocks of text.
This will make the panel overlap area less visible when applied to the real estate
sign. To make this change, simply use the up and down arrows at the right of the
width window to effectively shrink the size of the tile. The line indicating the sepa-
ration will move accordingly. When the line is in a good place for a panel gap, that
determines the new measurement of your first tile.
Click Apply to send both
Tiles to the Queue. Now
when you Print the job,
both will be added to
the Queue. As soon as
the first tile is done, the
second will be sent to the
printer.