User guide
• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: 1-800-899-5655 •Local Phone: 903-462-7700 •Fax: 1-800-966-6834
26: Tiling
Although the maximum
media size for the
PrismJET DTx is 13” wide,
the JetCUT RIP software
supports creating and
printing images wider
than 13”. This is done
through the use of the
tiling feature.
Tiling breaks an image
into smaller sections, or
tiles, that fit the print or
cut parameters of your
output device.
This job has been sent to
the Print and Cut Queue
to be contour-cut on a
Craft ROBO Pro. Here,
we see that, in the pre-
view pane, it is clear
that the job is too large.
The red overlay shows
the portion of the job
that exceeds the print
area. You can either
shrink the image file
to fit, by changing the
dimensions,or you can
opt to tile it.
To tile the image, click
the Tile button below
the preivew pane. This
will open a dialog win-
dow that allows you to
decide how large each
tile should be.
26.1
26.2
This design for an 18” x
24” printed real estate
sign can be created in
JetPRO and printed and
contour-cut in JetCUT
using the Tiling feature.