User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
24: Queue Properties: Cont’d
25: Copies
The other parameter you
may want to change is
the platen gap. If you
are experiencing head
strikes, you may want to
increase the Platen gap
from normal to Max. This
increases the clearance
between the print head
and the media.
The simplest way to print multiple copies of an image is to design or import the im-
age file once and to send more than one copy to the printer after the job is sent to
the JetCUT production queue.
You can also design an image in JetPRO and make copies there before sending
the job to the JetCUT queue, but this will unnecessarily increase the size of the file
that needs to be processed and printed. This will result in much larger file sizes and
longer time to process and print the file. It is much more efficient to send the im-
age file once, RIP or process it, then decide how many copies to send to the printer
and/or cutter.
This is done by clicking
once on the job in the
queue to view it in the
Preview pane. The win-
dow below the preview
pane now shows a Copy
function. The default
value is to print or cut
only one copy. To alter
this, click the Copy win-
dow and enter the value
for the number of copies
you want to print.
24.10
25.1