User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
24: Queue Properties: Cont’d
From the General Tab,
you can change the Print
Mode by clicking on the
arrow at the right of the
Print Mode window. A
drop-down menu will
show all the installed
print modes for that
device. Click on a mode
from the list to make it
the new mode for that
queue.
If you don’t see the print
mode you need and you
decide to import a new
print mode, you can
access the Print Mode
Selector from the
General Window by
clicking the ellipse on the
button at the right of
the Print mode window.
For more information on
importing print modes,
please see section 22.
Media Setup. You can
make changes to
media settings by click-
ing the Media Setup in
the Queue Properties
Settings menu.
The default margins are
all set at zero. It is impor-
tant to change the value
of the Left Margin so
that your prints will not
start off the media edge.
24.3
24.4
24.5