User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
JetCUT uses Print Modes to control print quality. Print Modes incorporate ICC Pro-
files but also include settings such as print head height, margins, and selection of
registration marks for contour cutting. The easiest way to change from one print
mode to another or to make minor adjustments in Print Mode settings is through
the Queue Properties (section 23).
Adding a new Print Mode is very similar to adding a new device driver.
22.1
22: Managing Print Modes
To add a new print mode, Click
on the Device Menu in the Jet-
CUT nav bar. From the drop-
down menu, select Manage Print
Modes.
The Print Mode Manag-
er Window will pop up.
The Print Mode Man-
ager displays all PrismJET
DTx Print Modes and
indicates which ones
have been installed in
your control panel and
are ready for use.
You can designate fa-
vorite print modes here
by clicking on the Yel-
low Star, then clicking
on a particular mode.
This may help differenti-
ate a preference when
you have more than one
mode for a particular
type of media.
22.2
22.3