User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
Print & Cut Workflow: From FlexiSIGN & LXI: cont’d
Now use the Fill-Stroke
Editor to change the
color of the contour
cut. This can be done
by using the drop-down
palette in the editor or
the standard palette at
the bottom of the work-
space. Select a color
named CutContour.
Now select the design
and Export it as an .EPS
file. Be sure to check
the Selected Only box
in the export window.
Otherwise the entire
workspace will be ex-
ported and the file may
be too large to print.
Now open your JetCUT
Print and Cut Queue
and use the green “+”
icon to add the .EPS file
to the Queue. This will
open a window in which
you can browse to the
location of the saved
.EPS file. Find it and click
Open to add it to the
Queue.
19.4
19.5
19.6