User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
19: Print & Cut Workflow: From FlexiSIGN & LXI
Start by designing your
graphic in LXI Master
Plus or FlexiSIGN-PRO.
Once you have the im-
age created, you will
need to add a contour
cut path.
19.1
19.2
19.3
Click Effects, then select
Contour Cut from the
drop-down menu. De-
sign Editor will open the
Contour Cut dialog box.
Use the options to place
the cut path where you
want it, then press the
Enter key or click the
green check mark icon
to apply the contour cut.
Now you need to ap-
ply a specific attribute
to the contour cut so
JetCUT will read it as a
cutting path. Right click
on the perimeter of the
image and, from the
drop-down menu, select
Separate Contour Cut.