User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
8: Loading Media: Custom Roll Widths
8.3
When you open the
Queue, the default me-
dia size and margins are
displayed in the window
below the preview pane.
The default media width
for the PrismJET DTx is
13”, but some PrismJET
DTx compatible media is
only 12” wide. If you use
the 13” preview pane
for a narrower roll, you
won’t see the correct relationship of your image to the available media size. This
may result in insufficient space for registration marks when producing contour-cut
decals or incompletely printed images. To adjust the preview pane to the size of the
media you have loaded, click the button with the three ellipses next to the Default
Roll window. This will load the Media Setup window.
In the Media Setup Window, use the down
arrow to incrementally decrease the media
width value to fit your media. Or click in the
Size window and type in the correct value.
The minimum media width for the PrismJET
DTx is 12” wide. Enter 12.00 in the Size
window and click the Update button. The
new value will be displayed in the Preview
Pane of your Queue.