User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
7: Ink Charge: Cont’d
Scroll down to the Main-
tenance section in the
Particular Adjustment
Mode window and click
on Ink Charge. Then click
OK.
7.3
7.4
When the Ink Charge
window opens, click on
the Ink Charge button. A
slider will appear display-
ing the progress of the
charge. Once the ink
charge is complete, click
Finish to exit the pro-
gram.
Since the Ink Charge is most often used to initiate the printer, it requires a full set
of cartridges. If you are performing this function for some other reason and are us-
ing a sufficiently depleted set of cartridges, the Ink Charge function will report that
there is not enough ink to complete the process. In such a case, exit the program,
refill and reset the cartridges, then open the Epson Adjustment Program and per-
form the Ink Charge with the newly filled cartridges.