User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
6: Refilling Ink Cartridges - “Bulk Ink” System: Cont’d
Remove the cap from the bottle
of ink. If you have not already
done so, screw the needle onto
the bottom of the syringe. Lower
the needle and syringe into the
bottle making sure the needle
is below the surface of the ink.
Carefully pull the plunger of the
syringe upward, and draw approx-
imately 17ml into the syringe.
6.5
After removing the plug from the
cartridge, insert the syringe all
the way down into the cartridge.
Slowly inject the cartridge with
ink. Fill the ink close to the top,
but make sure not to overfill the
cartridge.
After filling the cartridge, return
the plug to the ink cartridge.
Softly shake the cartridge, to en-
sure no ink bubbles are trapped
within the ink. Thoroughly clean
the needle of the syringe, and be
sure to store it in a sealed plastic
zip lock bag. (It is a good practice
to store the syringes in groups
together, labeled, so that they are
not mixed up.)