User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
6: Refilling Ink Cartridges - “Bulk Ink” System.
After using the printer for a time, it will be necessary to replace or refill spent ink
cartridges. One option is to dispose of the spent cartridge and replace it with a
new pre-filled EnduraINK DTx ink cartridge. Another option is to use the 150ml
bottles to refill and reuse your ink cartridges. (The Bulk Ink System, includes the
bottles and related supplies and is sold separately).
If you choose to refill rather than replace your spent cartridges, you will need:
PrismJET DTx Bulk Ink System Refill Kit, containing:
• Four 150ml bottles of EnduraINK DTx ink (Cyan, Magenta, Yellow, and Black)
• Eight 20cc syringes and eight syringe needles
• One reusable AC20 cartridge chip resetter
To Refill Cartridges:
6.1
6.2
6.3
Step 1: When a cartridge needs to
be refilled or replaced, the amber
Ink light will illuminate on the
printer control panel. Press the Ink
button once to prepare the DTx to
change for the new or refilled
cartridge. The ink carriage will move from its parked position over the capping
station to the ink fill position. An amber light will illuminate on the CISC board
behind the ink cartridges indicating which cartridge needs to be replaced.
Lift the Plexiglas cover to gain
access to the print head. Then
press the gray cover button
to raise the print carriage and
expose the ink cartridges.