User guide

• www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020
•Toll Free Phone: [phone] •Local Phone: [phone] •Fax: [phone]
4: Ethernet Setup Cont’d
4.5
4.6
4.7
Connect to the Printer:
The Net Utility will automatically
search for the printer via USB or
wifi. While it’s searching, you will
see this screen. If it fails, it will re-
port that it was unable to connect
and give you the option to cancel
or try again. It is no uncommon
for success to take two or three
attempts.
Record the IP Address:
When the printer has
been found, it will ap-
pear in the list of found
devices with its MAC
address and IP address.
Record the IP address so
you can enter it in the
JetCUT Queue Properties
window to set the Eth-
ernet connection as the
default printer port.
Change Queue Settings:
Once you have the print-
er’s IP address, you can
change the port settings
in your JetCUT queues to
send data via Ethernet
instead of USB. Open
JetCUT and click Queue/
Manage Queues to open
the Queue Manager
window.