Specifications

RDI DRIVERS FOR THIRD PARTY ARM DEBUGGERS
WITH JTAGJET
15
FIGURE 15 Selecting the RDI driver DLL file for C-Spy.
Press OK to close the dialog box.
In the RDI menu, select Configure to open the RDI Configuration dialog.
Proceed to section Configuring the Connection on p. 22.
Keil uVision3
! To configure the Keil uVisoin3 debugger:
1. From the Project menu choose Options For Target. The Options for
Target dialog box appears. In the Debug tab, check Use RDI Interface
Driver (Figure 16.)