Specifications

RDI DRIVERS FOR THIRD PARTY ARM DEBUGGERS
WITH JTAGJET
9
FIGURE 11 The RDI driver for the Signum emulator is now available.
Press the Configure button to configure the connection between your
debugger and the Signum emulator. Proceed to section Configuring the
Connection on p. 22.
eSOL eBinder
The eBinder Development Suite is provided with a Board Support Package (BSP)
for a specific platform. The BSP contains documentation that covers the process
of setting up eBinder with the JTAGjet emulator and the selected target board.
The information below highlights the most important steps of the process. For
details, please consult the BSP.
! To use the JTAGjet emulator with the eSOL seBinder:
1. Set the eBinder EB_RDI_DLL environment variable to the full path
name of the Signum RDI driver. In a typical installation, the name is
“C:\Signum\RDI\SigJdsRDI.dll”.