Use and Care Manual

15
INSTALLATION
Wall mount procedure
Mark Screw Locations on Wall as per Figure 9 below:
UP
3 in
8 in
13.4 in
13.4 in
19.21 in
4 in
36 in
8 in
Fig. 9: Wall mounting dimensions
13.4
inch
Fig. 10:
• Drill holes at marked locations
using 5/16 in. drill bit.
WARNING
ELECTRICAL, PLUMBING OR GAS LINES MAYBE IN WALL.
Before cutting, drilling or hammering verify their location. If needed,
contact your electrician, plumber or service person
WALL MOUNTING
Fig. 11:
• Insert Rawl Plugs into wall after drilling hole.
• Screw hanger into Rawl Plugs ensuring that
threads are completely in the wall.
• Install spacers onto Screw hangers before
mounting appliance on wall.
IMPORTANT: If wall mounting an infrared unit, the distance from the oor to bottom
of the appliance must be at least 10 in. high