Instruction Manual

page6/9/2022 4 www.ledalite.com
11
Install Snap-In Flush Lens
Snap in lens into fixture.
10a
Mount the LED pan connector with the
supplied screw in the joiner kit.
LED Pan Joiner - Symmetric
Standalone Units: Lenses are supplied in 2’,
3’, 4’, 5’, 6’ or 8’ lengths.
Continuous Runs: Lenses are pre-cut to a
maximum of 8’ lengths and are specific to
run lengths. Consult layout drawings for
placement.
LED Pan Joiner - Asymmetric
10b
Mount the LED Pan connector with the
supplied screw in the joiner kit.
There are two pieces for asymmetric
fixtures.
!
ATTENTION: Install in accordance with local and national building and electric codes.
TruGroove Recessed Micro T-Grid Installation Instructions
ID-23