Manualshelf

Instruction Manual

ManualsBrandssignify ManualsMS Seriessignify LIGHTOLIER MS Series 3D Printed Lighting Track Heads
1234
Table Of Contents
3/1/2022 page 2 www.lightolier.com
INSTRUCTIONS FOR CONVERTING ATTACHEMENT FITTING TO OPERATE ON 2 CIRCUIT TRACK
To convert attachment FITTING to upper circuit of 2 circuit track, raise BRASS CONTACT to high position
by lifting CONTACT as high as stop permits and CONTACT clicks in place.
CAUTION: Please note that track with fixtures may not be balanced and could pivot if flexible cable is used
to suspend track stick. Utilizing stiff stem mounting system will ensure track is aligned properly.
Halo adapter
Juno adapter
Lightolier adapter
Circuit No. 1 (Low)
Circuit No. 1 (Low)
Circuit No. 1 (Low)
Circuit No. 2 (High)
Circuit No. 2 (High)
Circuit No. 2 (High)