User Manual

ManualsBrandssignify ManualsCompacsignify Chloride Compac exit/unit combo CLC

Codes and standards

• ETL listed to Standard 924

• NFPA 70

(National Electric Code)

• NFPA 101

(Life Safety Code)

• Suitable for damp locations

Construction

• White and black housing only.

• UL 94 V-0.5VA Flame rated,

UV stable thermoplastic housing

• Contractor friendly snap

together design

• Flat Wall, end, or ceiling mounted

- canopy provided for ceiling and

end mount applications

• Back plate keyhole slots are

easily removable knockouts

for securing to 4" j-box for

easy mounting

Installation

• Universal wall/ceiling/end

mounting

• Canopy not required for flat wall

mount(electronics contained

inside housing)

• Pop-out chevron directional

indicators are easily removed

when required

• Exit sign mounts to a single

gang boxes, 3" J-boxes and 4"

J-boxes (canopy provided)

• All exits signs are provided with

an extra stencil face plate for

double face sign applications

Electronics

• 120/277VAC, 50/60Hz dual

voltage selectable input

• Surge protected, solid

state circuitry

• Charging systems are complete

with low voltage disconnect

(prevents deep discharge

of battery), battery lockout

(prevents discharge of battery

during installation), and

brownout protection

Power consumption

CLCNR 120V = 0.0537

277V = 0.0385

CLCNG 120V = 0.0530

277V = 0.0384

Lamps

• CLC combo red and green LEDs,

plus contains two 3.6VDC -

2.2W longlife LED lamp sources

(5000K)

• Adjustable LED lamp heads can

provide forward or backward

emergency illumination

Battery

• Maintenance-free sealed 7.2V

Nickel Metal Hydride battery

• Manual test switch and LED

light indicator

• Supplies emergency illumination

for a minimum of 90 minutes

• Batteries have an approximated

service life of 6 to 8 years at a

operating temperature range of

10°C to 40°C (50°F to 104°F)

Remote capability

• CLC exit/unit combo when

specified with the 2R option,

provides enough remote

capability to supply DC power

to two CLR remote units with

one LED lamp head or one CLR

remote unit with two LED

lamp heads

• CLR Remote Units accepts

DC power from Compac LED

products with remote

capability only

Warranty

• Five year full warranty on unit

Self-diagnostics/Self-test

The CLC exit/unit combo

contain self-diagnostic/self-

test electronics as a standard

feature. An automatic self-test

is performed every month for 3

minutes, and a 30 minute self-test

every six months. A manual test

may also be performed at anytime

by pressing the manual test

button.

Manual testing:

Test button Length of test

1 press 30 seconds

2 presses 3 minutes

3 presses 30 minutes

4 presses 90 minutes

Self-Diagnostic Red status indicator:

Indicator Status

One blink Battery is not

connected

Two blinks Battery voltage

has dropped below

acceptable value

Three blinks Charger board

circuit fault

Four blinks Transfer fault

Five blinks Lamp fault

Six blinks Remote lamp

head fault

Seven blinks EXIT Led strip fault

Operation

Press the test button and the

EXIT legend will remain lit and the

LED indicator will turn off. Release

the test button and the LED

indicator will turn on and the EXIT

legend will remain lit.

The Self-diagnostic/self-

test electronics meets the

requirements of the National

Electric Code and/or the National

Fire Protection Association.

CLC Compac exit/combo unit

The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract.

is subject to change, without notice. Signify does not give any representation

or warranty as to the accuracy or completeness of the information included

herein and shall not be liable for any action in reliance thereon. The information

presentedin this document is not intended as any commercial offer and does

notform part of any quotation or contract, unless otherwise agreed by Signify.

Compac_combo_CLC 02/21 page 3 of 3

Signify North America Corporation

200 Franklin Square Drive,

Somerset, NJ 08873

Telephone 855-486-2216

Signify Canada Ltd.

281 Hillmount Road,

Markham, ON, Canada L6C 2S3

Telephone 800-668-9008

All trademarks are owned by Signify Holding or their respective owners.