User's Guide

36
BEFORE FIRST USE
INTENDED USE
Snoozeal is indicated for the reduction of snoring and mild sleep apnoea
(AHI ≤15) in adults (18 years or older).
Check all the components are intact,
undamaged and available as described
in the What’s In The Box section.
Fig 9.
Fig 10.
1. Charge the Control Unit fully for 2 hours
before first use. The flashing blue light
will become continuous when the
Control Unit is fully charged.
2. Ensure new AAA batteries are placed
within the battery compartment in the
Remote Control.
3. You will need to Bluetooth pair your
Control Unit with the Remote Control
before starting.
- Connect the Mouthpiece to the fully
charged Control Unit.
- Press the Power on/o button on
Remote Control.
-
Press the and arrow on the Remote
Control simultaneously for three seconds.
- The blue LED on the Remote Control
and the Snoozeal logo on the Control
Unit will start to blink, to indicate
Bluetooth pairing process.
4. The Remote Control
display will show one or
more Control Units (Fig 9).
(Bluetooth identity can be
located as the characters
following the "BT ID:" on
the packaging)
5. Once the correct Control
Unit is highlighted, press
the ‘P’ button on the
remote to request pairing
with the selected Control
Unit.
6. On successful Bluetooth
pairing, the blue LED on
the remote and Control
Unit will blink once every
5 seconds and the remote
will display the Bluetooth
paired status (Fig 10). If
the Bluetooth pairing
status is not shown on the
remote, then please refer
to the troubleshooting
section below.