User's Manual

User Manual
- 3 -
Preface
This user’s manual describes the installation, commissioning and maintenance of wide
band consumer repeaters of LTE700+CDMA/GSM850+ PCS/GSM1900+AWS five systems.
Please do read user manual carefully before installing and maintaining the repeaters.
The information in this manual is subject to change without prior notice.
Opinions are welcomed about the manual improvement.
1. Safety Warnings
Users must follow the below principles：
 Repeater should follow system requirement of communication equipment, assure good grounding and
lightning protection.
 The power supply voltage of repeater should meet the standards of security requirement; any operation
shall be carried out only after cutting off power in advance. Only the professional is authorized for the
operation.
 Do not dismantle machine, maintain or displace accessories by yourself, because in this way, the
equipment may be damaged and you may even get an electric shock.
 Do not open the repeater, touch the module of repeater, or open the cover of module to touch the electronic
component. The components will be damaged due to electrostatic.
 Please keep away from heating-equipment, because the repeater will dissipate heat during working. And do
not cover booster with anything that influences heat-dissipation.
2. Introduction
Our SM-F13CPAL; SM-F10CPAL; SM-CW33CPAL; SM-C33CPALfull band repeater is the perfect solution for
providing a wireless improvement in the cellular reception of a home, office, restaurant, VIP Room, apartment,
building or shopping mall, in the quickest time possibly. One repeater covers 50 to 500 square meters.
In order to maintain safe and specific output signal levels, this repeater has built-in signal oscillation detection
circuit to adjust the gain automatically so as to avoid interference to the cellular network, also it gets color
changing LED’s indicating its environmental status: the Alarm LED’s located on the front of the unit will change
color from green to orange or red, (depending on the input power level) when the system detects signal
oscillation in the working band or the input signal is beyond a safe limit.
Our repeaters also feature a Network Safe / MUTE feature that automatically shuts off the repeater to protect the
cellular network. Users shall make sure the LED’s remain green at all times for optimum system performance.