User's Manual

User Manual

- 13 -

6.2. Mechanical specification

SN Item specification

1 Environment Conditions IP40

2 Cooling mode Nature cooling

6.3. Environment Conditions

SN Item specification

1 Operating Temperature -25°C to +55°C

2 Storage Temperature -40°C to +80°C

3 Humidity 5% to 85%

6.4. Requirements for adapters

SN Item Minimum Typical value Maximum

Input Voltage Range

100 V 120 V 240 V

Output Voltage Range

47 Hz 60Hz 63 Hz

6.5. High level summary and/or brief description of safeguard features



Anti-oscillation mechanism: There is the module to detect the oscillation signal when power on. If there is the oscillation

detected, the device will shut down the links (uplink within 300ms, downlink within 1s) ; 1 minute later repeater will restart and

detect the oscillation signal again, this process will repeat 5 time till the repeater is totally shut down. Please refer to the testing

report in the FCC.

 AGC: If the input signal is detected to be too large, the MCU automatically control the transmission to reduce the gain of

output signal to ensure that the output signal power level compliance with the factory setting. If the output signal of the

amplifier is detected to be too large, the MCU automatically controls the input signal to ensure compliance with the

factory setting.

 Noise-power limiting circuit: When there is no mobile phone signal in 5 minutes at the covering area, the device will shut

down the

uplink, so as to not to affect the BTS.