Installation Instructions

Contact Tech Support at 1.800.215.7015 or email at [e-mail]
30
IMPORTANT: Do not connect your cellular device to the
cellular booster, as it may damage your cellular device.
!
IMPORTANT:
1
Never point the front of the yagi donor (donor) antenna towards the
inside of the server (indoor) antenna.
2
Verify that the supplied coaxial cables from both the donor (outdoor)
antenna and the server (indoor) antenna are properly connected to
the cellular booster before powering it up.
3
Carefully plug in the supplied 110-volt power adaptor into the back
of the cellular booster where it is marked ‘power’ and connect the
other end to a power outlet.
WARNING! Using a power supply that is not
included in your kit could damage your equipment
and void your warranty.
!