Installation Instructions

Contact Tech Support at 1.800.215.7015 or email at [e-mail]
3
INSTALLATION INSTRUCTIONS FOR THE
FOLLOWING CELLULAR BOOSTERS:
1
SAFETY AND WARNINGS
• Turn AC power OFF at the main circuit breaker before
working on any electrical connections.
• All AC power wiring and coaxial cable wiring must conform
to local or national codes.
• The AC rated input power must be within 10% of the voltage
requirements of the device.
• When grounding the system, a solid copper conductor no
smaller than 8 AWG should be used.
• DO NOT connect a ground wire to a gas supply line.
• DO NOT open the booster. Touching internal parts could
cause injury or damage. This will void the waranty.
!