Installation Instructions

Contact Tech Support at 1.800.215.7015 or email at [e-mail]
13
After the booster is powered on, uplink(UL) and downlink(DL) gain and DL output
power are displayed. “Band”–Shows the working frequency. Below is a list of the
frequencies displayed corresponding to the Band display shown on the screen.
LCD FEATURES
ALERT
FEEDBACK
ON/OFF
MODE
“UL (dB)” “DL (dB)”– Gain Indication.
The displayed value shows real-time uplink and downlink gain. These values will
change slightly as the ALC or ISO makes changes to the gain to optimize coverage.
“Power dBm”– Power Indication.
The displayed value shows real-time downlink power that the amplier is
delivering to the indoor antenna port. When the amplier DL output power is
lower than -10dBm, the value will display ”---”.
Frequency
Band display
Lower
700MHz
LTE 700
Upper 700MHz
C
ellular Cell 800
PCS
PCS 1900
AWS
AWS 2100