Operation Manual

33
Problem and possible solutions
Hearing inrument emits signal tones.
●
Replace or recharge the empty battery
(depending on the battery type).
Hearing inrument does not work.
●
Turn the hearing inrument on.
●
Gently close the battery compartment completely.
●
Replace or recharge the empty battery
(depending on the battery type).
●
Make sure the battery is inserted correctly.
●
Power-on delay is active.
Wait several seconds and check again.
Consult your Hearing Care Professional if you encounter
further problems.
Signia Pure primax EN.indd 33 18.01.2016 13:14:00